Toimitustavat / -kulut tälle tuotteelle:
Nouto Postista 9,95 €
Posti Express toimitus perille 14,95 €
World’s smallest Flush Z-Wave Relay
Qubino FLUSH 1 RELAY
The Qubino Flush 1 Relay is ideal as an electrical device switch for lights, fans, ovens, washing machines, irons, power sockets, garage doors, electric radiators, water heaters, etc. You can control it either remotely through the Z-Wave network or through wall switches. It also measures power consumption and supports the connection of a digital temperature sensor.
What is it used for?
The Qubino Flush 1 Relay is ideal for remotely controlling and switching electrical devices (e.g. lights or fans).
The smallest of them all.
The Qubino Flush 1 Relay module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.
The Qubino Flush 1 Relay can measure the power consumption of the connected electrical device and itself has an extremely low power consumption of just 0.4 W.
The Qubino Flush 1 Relay can operate across a wide temperature range, from a chilly -10˚C to a scorching 40˚C (14˚–104˚F). It supports the connection of a digital temperature sensor, which is also useful for creating complex scenarios. Every module also acts as a repeater in order to improve the range and stability of the Z-Wave network.
The simplest installation.
Extremely small size and a specially designed casing mean that connecting the module inside a flush mounting box is simplicity itself. The installation process, tested and approved by professional electricians, consists of just three simple steps:
The most tested and most reliable module.
Qubino modules are “install-and-forget” products. Our products are made to last, so we only select and use top-quality electronic components. Our modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.
* In the case of loads other than resistive, pay attention to the value of cosφ and if necessary use a load lower than the rated load. Max current for cosφ = 0.4 is 3 A at 250 VAC, 3 A at 24 VDC L/R = 7 ms.
Varastossa, arvioitu toimitusaika 3-5 arkipäivää
Z-Wave ja Z-Wave Plus teknologiat
Fiksutekniikka OyMäntylänrinne 721160 MERIMASKU
+358 2 4808 firstname.lastname@example.org://fiksukoti.fiY-Tunnus: 2753208-2