Qubino Flush 1 Rele

Qubino Flush 1 Rele

59,95 

Varastossa, arvioitu toimitusaika 3-5 arkipäivää

TUOTEKOODI: ZMNHAD1 TUOTERYHMÄT: , , , , ,

Tuotemerkki: Qubino
EAN: 3830062070102

Toimitustavat / -kulut tälle tuotteelle:

Matkahuolto Bussi- ja lähellä-paketti 7,95

World’s smallest Flush Z-Wave Relay

Qubino FLUSH 1 RELAY

The Qubino Flush 1 Relay is ideal as an electrical device switch for lights, fans, ovens, washing machines, irons, power sockets, garage doors, electric radiators, water heaters, etc. You can control it either remotely through the Z-Wave network or through wall switches. It also measures power consumption and supports the connection of a digital temperature sensor.

 

What is it used for?

The Qubino Flush 1 Relay is ideal for remotely controlling and switching electrical devices (e.g. lights or fans).

The smallest of them all.

The Qubino Flush 1 Relay module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.

Energy wizard.

The Qubino Flush 1 Relay can measure the power consumption of the connected electrical device and itself has an extremely low power consumption of just 0.4 W.

Remarkably versatile.

The Qubino Flush 1 Relay can operate across a wide temperature range, from a chilly -10˚C to a scorching 40˚C (14˚–104˚F). It supports the connection of a digital temperature sensor, which is also useful for creating complex scenarios. Every module also acts as a repeater in order to improve the range and stability of the Z-Wave network.

The simplest installation.

Extremely small size and a specially designed casing mean that connecting the module inside a flush mounting box is simplicity itself. The installation process, tested and approved by professional electricians, consists of just three simple steps:

  1. Remove the switches from the box and disconnect the wires.
  2. Connect the wires to the Qubino module and insert it in the box.
  3. Fix the switches to the box.

The most tested and most reliable module.

Qubino modules are “install-and-forget” products. Our products are made to last, so we only select and use top-quality electronic components. Our modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.

Technical specifications

Power supply110 – 230 VAC ±10%
50/60Hz, (24-30 VDC)
Rated load current of AC output (resistive load)*1 X 10A / 230 VAC
Rated load current of DC output (resistive load)1 X 10A / 30 VDC
Output circuit power of AC output (resistive load)2300 W (230 VAC)
Output circuit power of DC output (resistive load)240 W (24 VDC)
Power measurement accuracyP = 5–50 W, +/-3 W
P > 50 W, +/-3%
Digital temperature sensor range
(sensor must be ordered separately)
-50° ~ +125°C
Operation temperature-10° ~ +40°C
Distanceup to 30 m indoors
Dimensions (WxHxD)41.8 x 36.8 x 15.4 mm
(packaging)(79x52x22 mm)
Weight (including packaging)28 g (34 g)
Electricity consumption0.4 W
For installation in boxesØ ≥ 60 mm or 2M, depth ≥ 60 mm
SwitchingRelay

* In the case of loads other than resistive, pay attention to the value of cosφ and if necessary use a load lower than the rated load. Max current for cosφ = 0.4 is 3 A at 250 VAC, 3 A at 24 VDC L/R = 7 ms.