Qubino Flush PWM Termostaatti

Qubino Flush PWM Termostaatti

69,95 

Lähetettävissä: Toimitusaika 5-10 arkipäivää

SKU: ZMNHLD1 Categories: , , , ,

Tuotemerkki: Qubino
EAN: –

Toimituskulut tälle tuotteelle:

Nouto Postin noutopisteestä tai pakettiautomaatista: 7.95€

Posti Express: 14,95€

World’s only Z-Wave PWM thermostat

FLUSH PWM THERMOSTAT

The Qubino Flush PWM Thermostat is ideal for controlling underfloor heating. It works on both 110/230V AC and 24V DC. You can control it either remotely through the Z-Wave network or through wall switches. It also measures power consumption.

What is it used for?

The Qubino PWM Thermostat is used to regulate floor heating temperature using full wave PWM technology. It enables better temperature regulation and a more constant temperature, resulting in long-term energy saving.

The smallest of them all.

The Qubino Flush PWM Thermostat module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.

Energy wizard.

The Qubino Flush PWM Thermostat can measure the power consumption of the connected electrical device and itself has an extremely low power consumption of just 0.7 W.

Remarkably versatile.

The Qubino Flush PWM Thermostat can operate across a wide temperature range, from a chilly -10˚C to a scorching 40˚C (14˚–104˚F).

The simplest installation.

Extremely small size and a specially designed casing mean that connecting the module inside a flush mounting box is simplicity itself. The installation process, tested and approved by professional electricians, consists of just three simple steps:

  1. Remove the switches from the box and disconnect the wires.
  2. Connect the wires to the Qubino module and insert it in the box.
  3. Fix the switches to the box.

The most tested and most reliable module.

Qubino modules are “install-and-forget” products. Our products are made to last, so we only select and use top-quality electronic components. Our modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.

Technical specifications

 

Power supply110 – 230 VAC ±10%
50 / 60 Hz, (24–30 VDC)
Rated load current of AC output0.85 A / 230 VAC
Rated load current of DC output0.85 A / 30 VDC
Output circuit power of AC output (resistive load)200 W (230 VAC)
Output circuit power of DC output (resistive load)21 W (24 VDC)
Power measurement accuracy+/-2 W
Digital temperature sensor range-50° ~ +125°C, resolution 0.1°C
Digital temperature sensor cable length1000 mm
Operation temperature-10° ~ +40°C
Distanceup to 30 m indoors
(depending on building materials)
Dimensions (WxHxD)41.8 x 36.8 x 15.4 mm
(packaging)(115 x 96 x 22 mm)
Weight (including packaging)48 g (64 g)
Electricity consumption0.7 W
For installation in boxesØ ≥ 60 mm or 2 M
SwitchingMOSFET